Acrylic display stands require proper cleaning methods to avoid damaging their surfaces.
First, for general dust and light stains, wiping with a soft dry cloth is the most basic cleaning method. For example, you can choose a clean microfiber cloth, which is soft and will not scratch the acrylic surface. Gently wiping the surface of the display stand can remove most of the dust without leaving fiber residue.
If there are stubborn stains on the display stand, such as fingerprints, grease, or some minor water stains, you can use a mild detergent to clean it. It is recommended to use a diluted detergent solution. Add a small amount of detergent to warm water, stir gently, and then use a soft damp cloth to dip the solution to wipe the stained area. During the wiping process, the action should be gentle and avoid excessive force. After wiping, you need to wipe the detergent solution with a clean damp cloth to prevent the residual detergent from damaging the acrylic surface.
For some sticky stains, such as label residue or glue marks, you can use a special acrylic cleaner or some organic solvents, such as alcohol. Pour a small amount of alcohol onto a clean cotton ball or soft cloth, and then gently wipe the sticky area. But be careful, when using organic solvents, you must first test a small area on an inconspicuous part of the display stand to ensure that there will be no adverse effects such as corrosion or discoloration on the acrylic surface. Also, use as little as possible and do not wipe for too long.
When cleaning the inside of the acrylic display stand or some hard-to-reach corners, you can use a small cleaning tool such as a soft brush or a compressed air can. A soft brush can be used to sweep away dust in the corners, while a compressed air can can blow away dust.
After cleaning, it is best to use a clean dry cloth to thoroughly dry the surface of the display stand and keep it dry. Avoid using rough towels or cleaning tools containing abrasive particles, as these may leave scratches on the acrylic surface. In addition, do not let the display stand come into contact with substances with strong acidity or alkalinity for a long time to avoid affecting its transparency and surface quality.
